Bil-Jax 0108-0104H Manual do Utilizador descarregar pdf (Página 20)

3 OPERATING PROCEDURE

Perform the following procedures to operate the Lumber-Jax

log splitter.

1. Read and follow all safety precautions contained in

Section 1 of this manual.

2. Position the splitter on a firm and level surface at the

work area. Block the wheels to prevent movement of

the splitter. Unhitch the splitter from the tow vehicle.

3. Ensure that all personal protective equipment such as

goggles, hearing protection, and safety shoes are being

worn.

4. Remove the lock pin from the splitter I-beam hold

down. Refer to Figure 3-5.

I-BEAM

HOLD

DOWN

LOCK PIN

Figure 3-5. I-Beam Lock Pin

WARNING

The splitter is designed to operate with the I-beam in the

vertical position only. Operating the splitter with the

I-beam in any other position may cause serious personal

injury or damage to the splitter.

5. Ensuring the I-beam path is clear, lift the I-beam into

the vertical position. Do not split logs with the I-beam

in any other position.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Sem comentários

Bil-Jax 0108-0104H Manual do Utilizador Página 20